Moisture Paint

A white, ready-to-use synthetic insulation paint produced on a specially modified resin base and free of aromatic solvents, for eliminating the damp and moisture problems caused by natural conditions on the interior and exterior walls of buildings.

It offers high whiteness, does not yellow and is ready to use. Thanks to its excellent moisture and alkali resistance, it prevents the formation of damp and moisture and covers existing damp and moisture stains. It can be applied to all kinds of damp or dry walls and to painted and unpainted surfaces. As it contains no aromatic solvent, its odour is light. It does not cause blistering on the wall and has high adhesion strength. Optionally, a water- or solvent-based paint can be applied over it. It is not affected by UV, rain, water, salt water or salt efflorescence.

It is used on the interior and exterior walls of buildings; on painted or unpainted damp and moist walls, plinths, basement walls, tunnels, and on surfaces and floors such as plaster, gypsum, concrete and screed, for damp and moisture problems.

Surface Preparation&Application

It is ready to use and requires no primer. Dust and blisters on the surface to be applied must be cleaned and surface defects must be repaired with suitable repair mortars. The surface to be applied may be damp, moist or dry. It can be applied to all kinds of painted or unpainted surfaces. Open the cap of the product in its original packaging and stir thoroughly for 2-3 minutes. The surface and ambient temperature must be between +5°C and +30°C. It must be applied in two coats. The second coat must be applied 8 hours after the first. The applied areas must be ventilated well, and a mask, gloves and protective goggles must be used during application.