Poligard

This is a solvent-based, synthetic resin insulation material. Water insulation material that is used on concrete before coating the exterior walls, terraces, basements, bathroom floors and swimming pools. Transparent and flexible. Resistant against chemicals such as alkali, soap and detergent.

Surface Preparation&Application
The surfaces should be cleaned from dirt, dust, oil and moisture. If the surfaces are moist, they should be dried with warm air. For cracks and dents, a paste should be prepared by mixing the marble powder or the fine powder of the used filler with Poligard Waterproof Primer. Spot repair paste should applied and the surface should be sanded. Based on the absorbing capacity of the surface, applied as 1 to 3 coats. A curing period of 0.5-1 hour is required between each coat.
Thinning / Blending Ratio
Ready to use.
Coverage Area
Varies according to the application and the surface’s absorbing power.
Drying Time
At 20°C, dries in 20 to 30 minutes.
Recommended Application Tools
Sponge, sponge roller, roller and brush.
Package
0.75 L - 2.5 L - 15 L
Related Products
Camouflage Stain Remover Primer VIEW DETAIL
Polimark Road Marking Paint VIEW DETAIL
Poliroad Road Marking Paint Water Based VIEW DETAIL
Roof Fiber VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.