X1 American Panel Door Paint

Water-based, odorless, silk matte finish topcoat paint with high coverage and excellent washability, specially developed for American panel and trim doors. Does not leave brush or roller marks.* For perfect wipe clean* performance, allow 30 days after application for full curing. (Approximate curing time is 30 days.)

Surface Preparation&Application
Holes and cracks should be filled with PERLA PUTTY. After the putty application, a filled primer must be applied. X1 ANTI-AGING ODORLESS LEAFING should be applied 18–24 hours after the primer application. Since differences in finish may occur when applied with a brush or roller, it is important to roll close to the wall edges for a consistent appearance
Thinning / Blending Ratio
Ready to use. If desired, it can be diluted with up to 5% water by volume.
Coverage Area
10-15 m²/L on single coat.
Drying Time
At 20°C, touch-dry in 5 minutes, surface-dry in 30 minutes, and fully cured in 24 hours
Recommended Application Tools
Roller, brush or spray gun.
Package
0,75 L - 2,5 L
Related Products
Polimetal Hammer VIEW DETAIL
X1 All VIEW DETAIL
Spray Plastic Paint VIEW DETAIL
Spray Acrylic Colors VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.