TSE

Perla Silicone Matte

This is a water-based, silicon, matte interior top coat paint. Acrylic copolymer binder-based. Applied on surfaces such as plaster, concrete and eternit. It is an odorless, cleanable decorative interior paint with convenient application and fine covering properties. The water repelling and vapor permeability increasing ability of the paint’s silicon base prevents bubbling and peeling, especially in humid environments.

Surface Preparation&Application
All surfaces must be smooth, dry and cleaned of dirt and dust. Cavities and cracks should be filled and a uniform flat surface can be achieved by applying PERLA MACUN (Putty). If the surface has solvent based paint, TRANSFER ASTARI (Primer) should be applied. DOLGULU ASTAR should be applied on mineral based low absorbing non-dusting raw surfeces as a single coat. A-STAR or POLİZOLAN should be applied on the surfaces which have the application of plaster to prevent dust emission. It should be applied to surfaces in two coats after 18-24 hours of application of primer. On between coats, should be waited at least 4 hours. The ambient and surface temperature should be between 5-30°C during application.
Thinning / Blending Ratio
Thin with water by 15%.
Coverage Area
11-13 m²/L on single coat.
Drying Time
At 20°C, the paint is touch-dry in 15 minutes, antidust-dry in 30 minutes and hard-dry in 3 hours.
Recommended Application Tools
Satin roller, interior roller and brush.
Package
2.5 L - 7.5 L - 12.5 L (20 kg)
Related Products
Elegans Soft Mat VIEW DETAIL
Elegans Extra Matte VIEW DETAIL
Ambians Extra VIEW DETAIL
Elegans Semi-Matte VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.