Marine&Marine Pro Antifouling Paint

All surfaces should be cleaned from oil, dust, dirt, rust, loose layers, old paint residues, putty residues and similar materials that will prevent the paint from adhering to the surface. Marine & Marine AA Boat Primer should be applied on the prepared surface at least 100 micron dry film as a primer before the Antifouling Paint. After completing 24 hours drying time of Marine & Marine AA Boat Primer, antifouling paint should be applied. Since the paint hydrolyses as the vessel travels, thickness of the applied film is very important. At least 150 microns of dry film should be obtained. Wait 4 to 6 hours between coats. The boat should be launched to the sea 8-10 hours of waiting after the last coat has been applied. Pay attention to the factors that may adversely affect the paint performance. Care should be taken on not to apply to damp and wet surfaces or in very hot, very cold, very windy, rainy weather, and early morning or evening hours when there is a risk of dew.Application Temperature: min +10 ° C / max + 30 ° C

Used without thinning.It is a single component

2,5-3,5 m2/L (100 μ dry film thickness)

It is touch dry in 1 hour and fully dry in 8 hours. The waiting period between coats is 6-8 hours.

Roller and brush

20 kg