X1 All

Hard Surfaces: Tiles, ceramics, marble, granite, stone, pebble, mosaic, quartz composite, porcelain, china, glass, decorative items, and hand tools.
Plastic Surfaces: PVC window frames and pipes, toys.*
Wooden Surfaces: Furniture, kitchen and bathroom countertops, kitchen and bathroom cabinets, wooden frames, panel doors, MDF, parquet, cladding, solid wood, toys.*
Metal Surfaces: Inox and powder-coated white goods (refrigerators, washing machines, dishwashers, built-in appliance exteriors), kitchen and bathroom sinks, steel doors, radiators and pipes, wrought iron surfaces, staircase railings.
Painted Surfaces: Previously painted surfaces, synthetic primed surfaces, varnished surfaces, and surfaces with anti-rust applications.
Glass Surfaces: Canvas, interior and exterior wall decorations, and painting applications.

* Recommended for use on surfaces frequently touched by children, such as toys, as it complies with the Toy Safety Standard (EN 71-3).

• Ensure the surface is free from dust, dirt, grease, rust, silicone, and peeling or cracked old paint layers.
• Remove chemical residues like detergent buildup using white vinegar diluted 1:1 with water.
• Lightly sand old painted surfaces in good condition with fine sandpaper to enhance adhesion, then wipe away dust with a damp cloth.
• Ensure the surface to be painted is free of water and moisture.
• On rusty surfaces or those prone to rust, apply Primera Antipas before using X1 All.

If there are loose, peeling, or blistered areas on the surface to be painted, these sections should be repaired, and unstable coatings should be completely removed.
Primer application is not required before painting.

It is recommended to mix X1 All thoroughly and apply at least two coats using a brush or roller.
After the first coat is applied, wait for 45 minutes before applying the second coat.
Once the surface painted with X1 All has dried, X1 All Varnish can be applied 24 hours later.

Kitchen/Bathroom Cabinets: 10-14 m²/L (single coat)
Tiles/Ceramics/Marble Surfaces: 16-20 m²/L (single coat)
White Goods Surfaces: 16-20 m²/L (single coat)
Shower Cabin/PVC Windows: 16-20 m²/L (single coat)
Wooden Door/Panel Door/Steel Door/Flooring: 14-18 m²/L (single coat)

 

* The area covered may vary depending on the surface properties and application method.

The painted surfaces are ready for use after 2 days. They should be handled carefully for the next 7 days, avoiding contact with chemical cleaners, water accumulation, and impacts. The product reaches its maximum performance after 28 days.

• Avoid direct contact with chemicals such as bleach or undiluted toilet cleaner on the surface.
• It is recommended not to use dish scrubbers while cleaning.
• Avoid contact with sharp metal objects (knives, nails, metal spatulas, etc.).
• To achieve maximum performance on surfaces exposed to water, moisture, heat, light traffic, impacts, stains, chemicals, and scratches, it is recommended to apply X1 All Varnish.
• It should be applied together with X1 All Varnish on areas where water may accumulate, such as showers, bathtubs, and sinks.

Store in a place that is completely away from direct sunlight, in sealed containers, between 5-35°C. The container lid should be closed when not in use. Protect from freezing.

0.75 L