Poliroad Road Marking Paint Water Based

This is an acrylic emulsion, water-based road line paint. Matt paint that is used for marking all kinds of traffic lines and marks required on the road. Easily dries even at high humidity, low temperature and limited air circulation. It is resistant against wear. High-covering, environment-friendly, easier to use than solvent-based paints, safer in working conditions, easily cleanable after application. Adherence to old asphalt and concrete surfaces, and dirt resistance are much better than solvent-based paints.

Surface Preparation&Application
The application surface should be cleaned of dust, grease and needs to be dry. It is recommended to apply by spraying onto the road surface using automatic application equipment, followed by broadcasting glass beads over the surface. If necessary, application can also be done with a brush or roller. If necessary, application can also be done with a brush or roller. Application should not be performed at surface or air temperatures below 10°C or at relative humidity above 85%.
Thinning / Blending Ratio
Ready to use.
Coverage Area
300 microns wet film 0.480 kg/m², 600 microns wet film 0.960 kg/m²
Drying Time
Touch-dry in 15 minutes and hard-dry in 20-40 minutes.
Recommended Application Tools
Automatic applicator, brush and roller
Package
2.5 L - 25 kg.
Related Products
Titanium Anti Aging Universal Impregnated VIEW DETAIL
Roof Fiber VIEW DETAIL
Camouflage Stain Remover Primer VIEW DETAIL
Poligard VIEW DETAIL
WhatsApp

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.