Plastic Transparent Glue

The surfaces that will be glued should be cleaned from dust, dirt and oil. The new wooden surfaces should be saturated with 1 coat of Politex Water-based Semi-matt. After the glue is mixed thoroughly, it should be applied on one of the surfaces by covering the entire area, waited for few minutes to be absorbed and then pressed to the other surface. For a good result, the temperature should be above +15°C.

Ready to use.

4-7 m²/kg based on application surface.

At 20°C and 50% relative humidity, the glue fully-dries in 0.5 to 2 hours.

Brush and roller.

0.7 kg - 3 kg