Marine&Marine Anti Aging Ultra Antifouling Paint

This is a tin- and tin compounds-free, chlorine-rubber binder-based, self-polishing, anti-fouling paint that is used on the underwater sections of the wood, polyester and steel sheet boats to prevent the formation of fouling and boring mechanisms.

Surface Preparation&Application

Before application, wash the surface with fresh water and rub down with waterproof sand paper. After sanding, the surface should be washed with fresh water again and then dried. The surface should be wiped with a lint-free cloth and Polisel Cellulosic Thinner. Infrastructure preparation, cleaning and leveling should be completed before priming with two coats of POLISEL chlorine-rubber based boat primer. The first layer should be applied with a soft brush. The application of the fouling paint may begin after a curing period of 6 to 8 hours for the second layer. Ultra anti-fouling paint can be applied in 3 coats with roller, brush or airless gun. A curing period of 6 to 8 hours is required between each coat.