Industrial Finishing Paint

Before application, the surface should be cleaned of substances like dust, rust, grease that could reduce the adherence of the surface. The surface needs to be dry. Metal surfaces should be sandblasted to a minimum standard of Sa 2½, which is the ideal method, and primed within 6 hours using Industrial Primer or Rapid Primer. After the primer has fully dried (approximately 2 hours), the topcoat application can begin. The surface temperature must be at least 10°C. Application should not be carried out near the dew point or on wet or damp surfaces.

Can be thinned with Poli-HRM Thinner by %20 - 30

6-7 m²/L or 4-5 m²/kg (50-60 µ Dry Film Thickness)

Touch dry in 20-30 minutes, and hard-dry in 24 hours. Achieves its physical and chemical durability in maximum 5 days. 1 hour interval between coats.

Air-airless sprayer

15 kg - 20 kg