Epoxy Light Putty

Epoxy-based, double-component, non-sagging, Highy resistant multi-functional light filler putty. Resistant to water and chemicals. Yields perfect results when applied in thick layers. Covers small and medium-sized defects on the surface. Doesn’t put weight on the thick layer of the application surface due to its low specific weight. Has easy sanding properties.The main focus is the marine sector. It can also be successfully used in the treatment of osmosis problems in fiberglass boats.

Surface Preparation&Application
Applied on putties or epoxy primers that have been cleaned, degreased, and sanded with 60–80 grit sandpaper. Surfaces where Epoxy Light Putty has been applied must be sanded before applying a suitable topcoat or intermediate coat. Component A and Component B are mixed until a homogeneous mixture is obtained. Deep cracks and holes are filled by applying in thin layers.
Thinning / Blending Ratio
1 unit of Epoxy Light Putty + 1 unit of Epoxy Light Putty Hardener by weight. Use without thinning.
Coverage Area
Mixture consumption 1.5 kg/m² (for 1 mm application thickness.)
Drying Time
At 23°C, hard dries in 24 hours
Recommended Application Tools
Brush, roller, putty knife, or spatula.
Package
3 L kit (1.5 L A + 1.5 L B) – 15 L kit (7.5 L A + 7.5 L B)
WhatsApp

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.