Epoart

The surface should be cleaned and prepared for application such as dirt, rust, oil, etc.The mixture is prepared according to the application area. Molding is done. If bubbles and froth are observed, they are removed by heat gun or shake.

Do not thin. 1,66 units of Epoart A Komp. + 1 units of Epoart Hardener.

Coverage area depends on the coating thickness. Solvent-free product, does not lose volume.

Touch dry in 5 hours, and hard-dry in 24 hours. Achieves its physical and chemical durability in maximum 7 days. 18 hour interval between coats.

Pouring, trowel, spiked roller

0,8 kg Kit (0,5 kg A + 0,3 kg B)-2 kg Kit (1,25 kg A + 0,75 kg B)-12 kg Kit (7,5 kg A + 4,5 kg B)