TSE

A1 Silicone Flat

This is a water-based, high water repellent, alkali resistant, moisture resistant, maximum breathable and maximum covering matt exterior paint. Highly resistant to sunlight, rain, humidity and salt with high alkali resistance. Does not let in water due to its water repellent structure. And enables the moisture to be discharged thanks to its water vapor permeability. It can be used on mineral surfaces such as all kinds of concrete, briquette, aerated concrete, plaster and brick.

Surface Preparation&Application
If paint is being applied for the first time, dirty and loose parts should be removed. If it is being repainted, it should be ensured that it is clear of dust, and primed with Polizolan or A1 Silicon Primer. It is recommended to repair the surfaces using A1 Acrylic Paste. It is recommended to apply two coats after priming by waiting 3 to 4 hours between each coat depending on the temperature.
Thinning / Blending Ratio
Thin with water by 10-15%.
Coverage Area
8-10 m²/L on single coat.
Drying Time
At 20°C, the paint is dry in 1 to 3 hours and hard-dry in 24 hours.
Recommended Application Tools
Exterior roller and brush.
Package
2.5 L - 7.5 L - 15 L
Related Products
Perla Exterior Silicone Paint VIEW DETAIL
Exelans Flat VIEW DETAIL
Exelans Turbo Semi-Matte VIEW DETAIL
A1 Silicone Rough Texture VIEW DETAIL
WhatsApp

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.