A1 Extra Acrylic Flat

With its photocatalytic property, it has high resistance to surface dirt, self-cleaning. High water repellency prevents water penetration. Resistant to humid conditions, moisture, and salt water due to high alkali resistance. Provides long-term use due to sunlight resistance. Prevents moisture accumulation on interior and exterior surfaces. Easy application and spread performance prevent splashing.

Package
2.5 L - 7.5 L - 15 L
Surface Preparation&Application
On surfaces to be painted for the first time, clean any dirt or loose textures; for previously painted surfaces, remove blistered or dusty areas and prime with A1 SILICONE PRIMER. Raw plaster surfaces with high lime content should be washed with a 1:1 mixture of vinegar and water before priming and painting. Fill cracks with A1 ACRYLIC PUTTY. Apply in 2 coats. During application, ambient and surface temperature should be 5-35°C.
Thinning / Blending Ratio
Dilute with water at 15-20%.
Coverage Area
8-10 m²/L (per coat)
Drying Time
Touch dry 1-3 hours, surface dry 1-3 hours, recoating 1-3 hours, full cure 24 hours.
Recommended Application Tools
Apply with brush, exterior roller, or spray gun.
WhatsApp

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.